Boat Seat Fishing Fenders
Basic Info
Model No.: XC20170502001
Product Description
Model NO.: XC20170502001 Size: D=0.5~8m L=1~12m Product Name: Marine Depend on The Ball Quality: World Class Specification: CCC CCS ISO9001: 2008 HS Code: 8905200000 Service Life: 10-20 Years Function: Berthing Working Press: 0.05MPa-0.08MPa Trademark: XINCHENG Origin: Qingdao 1). Safe for excess load marine depend on the ball
The reaction force of a floating Pneumatic Fender does not increase sharply even under excess load. Therefore, these fenders perform extremely well under such condation and as a result, protect ships and mooring facilities.
2). No deterration or variation in performance
Because Pneumatic Fenders utilise the compressive elasticity of air, performance deteriation due to fatigue is completely absent. The performance of these fenders remain unchanged at extremely low temperatures, even below - 50'C.
3). Safety realiability
Xincheng Pneumatic Rubber Fender are constructed using several layers of strong tyre cord are therefore extremely resistant to pressure and cutting, and are therefore extremely resistant to pressure and cutting. The larger size ( 2.5m dia upward ) are fitted with safety valve to prevent accident in the event of over copressiom.
4). Construction
The fender body is constructed of an inner rubber layer, reinforcing cord layers and an outer rubber layer. All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven. Once completed, the fenders are pressure tested before relase.
To provide maximum strength and safety, the out skin of submarine fender is thicker than a normal surface fender.
The outer skin rubber compound is desinged and manufactured to be able to withstand both strenuous use and adverse weather. Condations whilst protecting the cord layers and inner rubber the cord layers are corranged at optimum angles designed to be completely airtight.
5). Simple and low cost installation
The weight of the fenders is supported by the water on which it floats, therefore, the fender can be morred simply by means of a guy rope or chain at minimal cost it can be removed easily to another quay or jetty when not use or transfeered to alternative mooring points as required
6). Chain and tyre net
Almost floating fenders are protected by a chain and tyre net. The purpose of the chain and tyre net is to protec the fender body from damage by sharp objets or protrusions such as rough faced quay walls, to distribute sheer forces along the length of the chain net and to prevent the fender body from having to absorb them.
Marine depend on the ball safe for excess load Boat Fender using ship to ship working press 0.05Mpa - 0.08 Mpa
Contact us if you need more details on Boat Nature Rubber Fender. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Nature Rubber Fender、Marine Rubber Fender. If these products fail to match your need, please contact us and we would like to provide relevant information.
The reaction force of a floating Pneumatic Fender does not increase sharply even under excess load. Therefore, these fenders perform extremely well under such condation and as a result, protect ships and mooring facilities.
2). No deterration or variation in performance
Because Pneumatic Fenders utilise the compressive elasticity of air, performance deteriation due to fatigue is completely absent. The performance of these fenders remain unchanged at extremely low temperatures, even below - 50'C.
3). Safety realiability
Xincheng Pneumatic Rubber Fender are constructed using several layers of strong tyre cord are therefore extremely resistant to pressure and cutting, and are therefore extremely resistant to pressure and cutting. The larger size ( 2.5m dia upward ) are fitted with safety valve to prevent accident in the event of over copressiom.
4). Construction
The fender body is constructed of an inner rubber layer, reinforcing cord layers and an outer rubber layer. All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven. Once completed, the fenders are pressure tested before relase.
To provide maximum strength and safety, the out skin of submarine fender is thicker than a normal surface fender.
The outer skin rubber compound is desinged and manufactured to be able to withstand both strenuous use and adverse weather. Condations whilst protecting the cord layers and inner rubber the cord layers are corranged at optimum angles designed to be completely airtight.
5). Simple and low cost installation
The weight of the fenders is supported by the water on which it floats, therefore, the fender can be morred simply by means of a guy rope or chain at minimal cost it can be removed easily to another quay or jetty when not use or transfeered to alternative mooring points as required
6). Chain and tyre net
Almost floating fenders are protected by a chain and tyre net. The purpose of the chain and tyre net is to protec the fender body from damage by sharp objets or protrusions such as rough faced quay walls, to distribute sheer forces along the length of the chain net and to prevent the fender body from having to absorb them.
Marine depend on the ball safe for excess load Boat Fender using ship to ship working press 0.05Mpa - 0.08 Mpa
This Marine Fender catalog | ||||||
| Initial pressure(Po) is 0.05Mpa | Initial pressure(Po) is 0.08Mpa | ||||
weight(kg) | R(KN) | GEA(KJ) | weight(kg) | R(KN) | GEA(KJ) | |
0.5*1.0 | 25 | 64 | 6 | 25 | 83 | 8 |
0.6*1.0 | 32 | 74 | 8 | 32 | 96 | 11 |
0.7*1.5 | 50 | 137 | 17 | 50 | 178 | 24 |
1.0*1.5 | 80 | 182 | 32 | 80 | 235 | 44 |
1.0*2.0 | 100 | 257 | 45 | 125 | 335 | 63 |
1.2*2.0 | 120 | 297 | 63 | 165 | 386 | 86 |
1.35*2.5 | 165 | 427 | 102 | 226 | 554 | 140 |
1.5*3.0 | 315 | 597 | 153 | 370 | 751 | 211 |
1.7*3.0 | 405 | 639 | 191 | 436 | 860 | 263 |
2.0*3.5 | 590 | 875 | 308 | 632 | 1138 | 424 |
2.5*4.0 | 1050 | 1381 | 663 | 1110 | 1815 | 925 |
2.5*5.5 | 1333 | 2019 | 943 | 1410 | 2653 | 1317 |
3.0*5.0 | 1880 | 2104 | 1210 | 2155 | 2709 | 1571 |
3.0*6.0 | 2160 | 2583 | 1485 | 2470 | 3292 | 1888 |
3.3*4.5 | 2020 | 1884 | 1175 | 2300 | 2476 | 1640 |
3.3*6.0 | 2300 | 2783 | 1675 | 2600 | 3652 | 2338 |
3.3*6.5 | 2700 | 3015 | 1814 | 3080 | 3961 | 2532 |
Note: The weight of the ball by ball weight (without jacket), the weight of error of ± 10%; reaction force error of ± 10% |
Product Categories : Marine Fender
Premium Related Products
Other Products
Hot Products
Ship Equipment Anti-Aging Rubber Pneumatic Yokohama Marine FenderHot DIP Galvanized Stud Link Anchor ChainPolyester 16 Strands Mooring RopeQuality Platform Steel Grating for SaleType I FenderMarine Bollard/ Mooring BollardShip Marine Super Cell Rubber Fender for Boat (SC Type)High Quality Rubber Boat Marine FenderCustom EPDM Rubber Rubber Loading Dock BumpersCylinderical Marine Fender (Y Type)Marine Rubber/Improved Super Arch Rubber FenderSuper Cone Fenders (ZC Type)Tire Rubber Fender Roller Type Wheel Type Dock FenderQuality Steel Grating Drain Covers for SaleD Type Hard Rubber Small Fenders for BoatsGd Type Rubber Fender