Marine Docking Ship Yokohama Fender

Model NO.: XC20140724002


Diameter: From 0.5m-4.5m


Type: Inland and Coastal Boats


Engine Type: Inboard


Certification: BV, CE, ISO9001, CCS, CCC


Specification: diameter *length


HS Code: 401694




Material: Rubber


Length: From 1.2m-8m


Marine Parts: Fender, bumper


Usage: Ship Launching, Protection, Ship Docking


Trademark: XINCHENG


Origin: Qingdao, Shandong








1). Safe for excess load marine depend on the ball



The reaction force of a floating Pneumatic Fender does not increase sharply even under excess load. Therefore, these fenders perform extremely well under such condation and as a result, protect ships and mooring facilities.

2). No deterration or variation in performance



Because Pneumatic Fenders utilise the compressive elasticity of air, performance deteriation due to fatigue is completely absent. The performance of these fenders remain unchanged at extremely low temperatures, even below - 50'C.



3). Safety realiability



Xincheng Pneumatic Rubber Fender are constructed using several layers of strong tyre cord are therefore extremely resistant to pressure and cutting, and are therefore extremely resistant to pressure and cutting. The larger size ( 2.5m dia upward ) are fitted with safety valve to prevent accident in the event of over copressiom.



4). Construction



The fender body is constructed of an inner rubber layer, reinforcing cord layers and an outer rubber layer. All three layers are bonded together by a combination of heat and pressure over a period of time in a vulcanising oven. Once completed, the fenders are pressure tested before relase.



To provide maximum strength and safety, the out skin of submarine fender is thicker than a normal surface fender.



The outer skin rubber compound is desinged and manufactured to be able to withstand both strenuous use and adverse weather. Condations whilst protecting the cord layers and inner rubber the cord layers are corranged at optimum angles designed to be completely airtight.



5). Simple and low cost installation



The weight of the fenders is supported by the water on which it floats, therefore, the fender can be morred simply by means of a guy rope or chain at minimal cost it can be removed easily to another quay or jetty when not use or transfeered to alternative mooring points as required



6). Chain and tyre net

Contact us if you need more details on Ship Fender. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pneumatic Fender、Marine Rubber Fender. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Marine Fender