Improved Arch Rubber Fender / Marine Fender (TD-BPE1000H)

Model NO.: TD-BPE1000H


Size: 1000h


Marine Parts: Fender, bumper


Certification: BV, ISO9001, CCS, SGS


Specification: PIANC2002, ISO9001, CCS, BV, SGS




Material: Rubber


Type: Inland and Coastal Boats


Usage: Fishing, Trade, Ship Launching, Protection


Trademark: TIANDUN


Origin: Qingdao, China


Quick Detail:

1.PIANC standard approved;

2.High durability, simple structure ;

3.UHMW PE pads covered;

4.Wear resistant;

5.Low friction coefficient.





Applications:

The working surface of the 4th generation super Arch Fender is adhered with the PE resin boards directly,of which the service life is prolonged dramatically.The fender can be widely utilized on the wharves of both gravity and piled foundation with a DWT below 30,000 (50,000), shipyards, docks and shipborne fender system.So it is welcomed by clients,and become the mainstream of designer's selection.



Description:

With the merits of high absorption energy,super arch rubber fenders are widely utilized, which can be laid with less restriction,and the dimensions of which are suitable to most installation conditions.The energy absorption per unit weight of which is only below that of the super cell rubber fenders, which is 3.5 times higher than that of the cylindrical type fenders, and 2.3 times higher than thar of D type rubber fenders.Therefore,the super arch rubber fenders can be manufactured with less amount of raw material.

Specifications:

Compounds	Superhigh Reaction force(P2)						High Reaction force(P1)						Standard reaction force(P0)				Low reaction force(P01)
Deflection	52.5%		55%			52.5%			55%			52.5%		55%		52.5%		55%
Performance Length(mm)	R KN	E KN·M	R KN	E KN·M	R KN		E KN·M	R KN		E KN·M	R KN		E KN·M	R KN	E KN·M	R KN	E KN·M	R KN	E KN·M
1000L	1078	452	1495	498	829		348	1149		383	688		290	954	318	588	246	815	272
1500L	1617	678	2243	748	1244		522	1724		575	1032		435	1431	477	882	369	1222	407
2000L	2156	904	2990	997	1658		696	2299		766	1376		580	1908	636	1176	492	1629	543
2500L	2695	1130	3738	112	2073		870	2874		957	1720		725	2385	795	1470	615	2037	679
3000L	3234	1356	4485	135	2487		1044	3448		1149	2064		870	2862	954	1764	738	2444	815

Competitive Advantage:

l Simple installation

l Wide ranges of sizes and lengths

l PIANC tested and certificated

l Low-friction faced design

l Tough and reliable design



1.The friction factor is less than 0.2,which can reduced the torsion at the bottom of the fender dramatically,and can prolong the service life of the Rubber Fender.

2.The PE resin board can be restored easily.

3.The PE resin board can be restored as various colors,i.e.blue, gray and nacarat etc., which can make the product with a beautiful outlook and obvious visibility,so it is very suitable to the marinas and other scene attracting quays..



INTRODUCTION:

With the merits of high absorption energy, super arch rubber fenders are widely utilized, which can be laid with less restriction, and the dimensions of which are suitable to most installation conditions. The energy absorption per unit weight op is only lower than that of the super cell rubber fenders, which is 3.5 times higher than that of the cylindrical type fenders, and 2.3 times higher than that of D type rubber fenders. Therefore, the super arch rubber fenders can be manufactured with less amount of raw material.



Due to high fraction coefficient between the surface of Super Arch Rubber Fender with the hull of the berthing vessels amounting to 0.8, this kind of rubber fenders often crack or destruct at the bottom, which is a shortage to this kind of rubber fenders. In order to reduce the friction factor, and act with less torsion to rubber fender when vessels are approaching and berthing, as well as prolong the service life of the rubber fender, steel frames with PE mosaic are fixed to the front of the rubber fenders. However, super arch rubber fenders are often abandoned due to the un-rebound deflection of the steel frame when the impaction acted locally. So this kind of rubber fender (excluding the combined type) is gradually eliminated from market before it is widely recognized by clients.

The working surface of the fourth generation super arch fender is adhered with the PE resin boards directly, of which the service life is prolonged dramatically. So it is welcomed by clients, and becomes the mainstream of designer's selection.



Characteristics



The characteristics of the improved super Arch Rubber Fender

1. The friction coefficient is less than 0.2, which can reduced the torsion at the bottom of the fender by large margin, and can prolong the service life of the rubber fender.

2. The PE resin board can be restored easily.

3. The PE resin board can be designed as various colors, i. e. Blue, grey and nacarat etc., which can make the product with a beautiful outlook and obvious visibility, so it is very suitable to the marinas and other scene attracting quays.

4. The fender can be widely utilized on the wharves of both gravity and piled foundation with a DWT below 30, 000 (50, 000), shipyards, docks and shipborne fender system.

Contact us if you need more details on Rubber Fender. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Marine Fender、Arch Rubber Fender. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Improved Arch Fender